Race Render 3 Mac OSX 10.9.5 - & MP4

Old forum being kept online for archive purposes and Knowledge Base
Forum rules
This is the old archived forum. Please post new threads in the new forum instead. Thank you.

Race Render 3 Mac OSX 10.9.5 - & MP4

Postby Elliottrally » Tue Oct 07, 2014 4:38 am

Hi, I have an issue where I can playback an MP4 file ok on the mac, but when I import it into RR3, the actually video display is not present. The clip is essentially present, as I can hear the audio, and it will automatically see that a data log is present but the video simply does not display.

I emailed the logs, but never heard back, so trying this as an alternative avenue.. Here's the log.

RaceRender Diagnostic Log Output

If you are encountering problems, copy & paste this into a message to RaceRender LLC
at http://RaceRender.com/Contact.html

Please do this immediately after the problem occurs, and include specifics on the type of
files you were using, how to reproduce the problem, what happened, etc.

*** Current Session Log ***

2014-10-07 21:04:18,"[Log Start]"
2014-10-07 21:04:18,"Session ID: 8F350D67"
2014-10-07 21:04:18,"Process ID: 607"
2014-10-07 21:04:18,"Prod: 'RaceRender' Ver: '3.0.11' Build: '20140821' OEM: 0"
2014-10-07 21:04:18,"64-bit Build"
2014-10-07 21:04:18,"MacOS X version 10.9.5 ('Version 10.9.5 (Build 13F34)')"
2014-10-07 21:04:18,"CPU Count: 4 (4 active)"
2014-10-07 21:04:18,"Hardware Model: iMac12,1"
2014-10-07 21:04:18,"Memory: 32.0 GB"
2014-10-07 21:04:18,"Previous session appears to have exited successfully"
2014-10-07 21:04:18,"ColorConvThread 0 started"
2014-10-07 21:04:18,"ColorConvThread 1 started"
2014-10-07 21:04:18,"Started 3 ColorConv threads"
2014-10-07 21:04:18,"ColorConvThread 2 started"
2014-10-07 21:04:18,"Edition: 3"
2014-10-07 21:04:18,"Loading AV Foundation interface..."
2014-10-07 21:04:18,"AV Foundation support enabled"
2014-10-07 21:04:18,"Loading QuickTime interface..."
2014-10-07 21:04:18,"QTKit support enabled"
2014-10-07 21:04:18,"RenderFrameThread 0 started"
2014-10-07 21:04:18,"RenderFrameThread 1 started"
2014-10-07 21:04:18,"RenderFrameThread 2 started"
2014-10-07 21:04:18,"Started 4 RenderFrame threads"
2014-10-07 21:04:18,"RenderFrameThread 3 started"
2014-10-07 21:04:18,"Showing main window..."
2014-10-07 21:04:18,"Special Save Project '/tmp/RR3-undo-8F350D67.rrp' (Mode 1)"
2014-10-07 21:04:18,"[Code] -21 'AudioOutVolume'"
2014-10-07 21:04:18,"[Code] -21 'AudioOutVolume'"
2014-10-07 21:04:18,"RenderEnd()"
2014-10-07 21:04:18,"RenderEnd()"
2014-10-07 21:04:18,"RenderInit(996x560 [4], 29.970 FPS, Audio Type 3 @ 22050 Hz, PreviewMode 1)"
2014-10-07 21:04:18,"Process Memory: 214 MB used"
2014-10-07 21:04:18,"Physical Memory: 103 MB available / 32768 MB total"
2014-10-07 21:04:18,"[Code] -21 'DispObjGet2' Param: -1"
2014-10-07 21:04:18,"[Code] -21 'DispObjGet2' Param: -1"
2014-10-07 21:04:18,"Launch complete"
2014-10-07 21:04:47,"Creating diagnostic log output"


The video format: MP4, Ambarella AVC encoder, 1440 × 1080 (1920 × 1080), Millions AAC, Stereo (L R), 48.000 kHz

PFS: 25
Data Rate: 8.65 mbits/s


Any suggestion in how I can get RR3 to work? A bit peeved that I've bought the software & it has failed to work correctly...

James
Elliottrally
 
Posts: 1
Joined: Tue Oct 07, 2014 4:29 am

Return to RaceRender (Archive & KB)



cron